AAK uses a welding reamer to process the Hydraulic Manifold Block, and the singl
$ 30 /unidad
IVA no incluido
Cantidad mínima: 100 unidades
Tiempo de entrega: 3 meses
Envío a:
Todo el mundo
Descripción de
AAK uses a welding reamer to process the Hydraulic Manifold Block, and the singl
:
For a hydraulic manifold block with many deep holes and great difficulty in finishing, the original hydraulic manifold block manufacturer worked on the trial order for 15 days. After 15 days of processing, the single hole processing cost increased by nearly 30%, and the production efficiency was only 1/5 of the normal. Leon understood that the processing cost was not affordable and had to change the manufacturer of the hydraulic manifold block. After AAK took over, the welding reamer with special groove and blade design was used to replace the conventional hard reamer. The linear speed was up to 680m/min, the production efficiency was increased by more than 10 times, and the processing cost of single hole position was only 1/3 of that of the original hydraulic manifold block manufacturer
Leon, from Germany, is one of our old customers, mainly purchases hydraulic valves. Leon contacted me a few days ago and asked me to try a special hydraulic manifold block test order, and specifically reminded that the original manufacturer used a hard reamer in the finishing process, the roughness can only reach about Ra1.6, the linear speed is not higher than 50m/min, and the tool processing service life is not more than 300 pieces. The aperture tolerance of this hydraulic manifold block shall be ± 0.005mm, and the hole wall roughness shall meet Ra0.8 and Ra3.2 at the same time. If the conventional coating hard reamer is used, the machining accuracy is difficult to reach the standard, and the service life of the tool is very short, which greatly increases the single hole processing cost, that is, increases the customer's purchase cost.
After 3 days of research and discussion, we replied Leon that AAK was 90% confident. After 25 days, AAK sent 6 hydraulic manifold block samples. 2 weeks later, Leon told us that the precision of AAK hydraulic manifold block fully conforms to the system error standard, and hoped that we could provide a competitive development price. Leon was surprised that how did AAK hydraulic manifold block achieve that the hole processing cost was 1/3 of the original manufacturer's, and the production efficiency was more than 10 times higher?
In view of the structure and processing technology of the hydraulic manifold block, AAK technical team realized that the traditional hard reamer processing technology was not suitable for the processing of this hydraulic manifold block. Through repeated design verification and trial cutting, it is finally determined that the welding reamer with special groove and blade design should be used to replace the conventional hard reamer, with the linear speed of 680m/min, the efficiency increased by more than 10 times, the tool processing service life increased from 300 pieces to 2,500 pieces, and the processing efficiency and tool service life increased significantly.
Leon, from Germany, is one of our old customers, mainly purchases hydraulic valves. Leon contacted me a few days ago and asked me to try a special hydraulic manifold block test order, and specifically reminded that the original manufacturer used a hard reamer in the finishing process, the roughness can only reach about Ra1.6, the linear speed is not higher than 50m/min, and the tool processing service life is not more than 300 pieces. The aperture tolerance of this hydraulic manifold block shall be ± 0.005mm, and the hole wall roughness shall meet Ra0.8 and Ra3.2 at the same time. If the conventional coating hard reamer is used, the machining accuracy is difficult to reach the standard, and the service life of the tool is very short, which greatly increases the single hole processing cost, that is, increases the customer's purchase cost.
After 3 days of research and discussion, we replied Leon that AAK was 90% confident. After 25 days, AAK sent 6 hydraulic manifold block samples. 2 weeks later, Leon told us that the precision of AAK hydraulic manifold block fully conforms to the system error standard, and hoped that we could provide a competitive development price. Leon was surprised that how did AAK hydraulic manifold block achieve that the hole processing cost was 1/3 of the original manufacturer's, and the production efficiency was more than 10 times higher?
In view of the structure and processing technology of the hydraulic manifold block, AAK technical team realized that the traditional hard reamer processing technology was not suitable for the processing of this hydraulic manifold block. Through repeated design verification and trial cutting, it is finally determined that the welding reamer with special groove and blade design should be used to replace the conventional hard reamer, with the linear speed of 680m/min, the efficiency increased by more than 10 times, the tool processing service life increased from 300 pieces to 2,500 pieces, and the processing efficiency and tool service life increased significantly.
Aak hydraulic valves
Hydraulic Manifold Block
ID producto: 13920758
| Referencia: AAK462
| Vendido por:
AAK INDUSTRY CO., LTD
Fecha de alta del producto 02/02/2023
-
Modificado por el vendedor 02/02/2023
Productos relacionados con
AAK uses a welding reamer to process the Hydraulic Manifold Block, and the singl
Máquina de corte láser de fibra CNC Metal acero inoxidable 3000W 4000W
A convenir
Jinan DXTECH CNC Machine Co., Ltd.
Fiber Laser Cutting Machine 1000W/2000W/3000W fiber laser cutter is suitable for metal cutting such as Stainless Steel Sheet, Mild Steel Plate, Carbon Steel, Alloy Steel Plate, Spring steel Sheet,...
Mesa de escritorio de 50 vatios para máquina de marcado láser de fibra
A convenir
Jinan DXTECH CNC Machine Co., Ltd.
Fiber Laser Marking Machine Introduction: Fiber Laser Marking Machine is the most advanced marking machine in the world. It replaced the traditional outdated technology, such as screen printing,...
Máquina de corte por láser de placa de tubo múltiple automática DXTECH de China
A convenir
Jinan DXTECH CNC Machine Co., Ltd.
Main Feature 1. Highly efficient production and labor force cost saving. 2. Guarantee reliability of the process. 3. Processing quality consistency. 4. Higher rate of returned customers. 5....
Máquina de corte láser CO2 tablero de espuma 300W no metal
A convenir
Jinan DXTECH CNC Machine Co., Ltd.
Partes principales 1. Taiwán alta velocidad y alta precisiónGuía linealCarril 2 de alta precisiónCremallera helicoidalSistema de 3LEADSHINEMotor 4. Tubo de láser CO2 sellado 5RuidaSistema de...
Máquina de corte láser de fibra de carbono para acero
A convenir
Jinan DXTECH CNC Machine Co., Ltd.
Área de procesamiento 1500mm * 3000mm Potencia de fibra 1000W/1500W/2000W/3000W/ 6000W/8000W Modo de refrigeración Sistema de refrigeración y protección por agua Restablecer la precisión de...
14-26" Truck Tire Changer Car tyre changing machine
$ 2,200 /ud
Henan Lycoda Industrial Co.,Ltd
The best seller- 26" truck tire changer, also so car or suv tyres, if you want to change your wheel, it is your smart choice to choose our tyre changing machine. Model LY160Rim diameter:...
Elight+shr hair removal, depilacion, fotodepilacion, permanent hair removal
A convenir
Medical Beauty
The theory of Elight (ipl + rf)Advanced technologies: bipolar rf (radio frequency) + ipl(intense pulsed light), can be used together or separately. Perfect treatment results can be expected. The rf...
Diode Laser, Laser de Diode para la depilacion, fotodepilacion, laser depilacion
A convenir
Medical Beauty
Advantages1. Suitable for any color of hair2. Suitable for any kind of skin3. Diode laser hair removal is safe, fast and high efficiency4. International Hair Removal Golden Standard.5. Permanent...
Juvederm 2 * 1 ML ultra 3 ultra 4 inyección de ácido hialurónico en gel relleno
$ 55 /pqte
Hebei Kouxuan Technology Co., Ltd
Hyaluronic acid (HA) is a naturally occurring substance that keeps skin moisturized and soft. JUVÉDERM® fillers are nonsurgical options that contain a modified form of HA. Treatment with JUVÉDERM®...
Aluminum Extrusion Profiles, Standard or Custom
A convenir
Cantidad mínima: 3.0 ud
GARCO
GARCO is a leading specialist in manufacturing high-tech custom aluminium extrusions across many industries, from windows to medical equipment worldwide. A dedicated production unit, which is used...
Custom Extruded Products - Grupo GARCO
A convenir
Cantidad mínima: 3.0 ud
GARCO
GARCO is a leading specialist in manufacturing high-tech custom aluminium extrusions across many industries, from windows to medical equipment worldwide. A dedicated production unit, which is used...
Fotodepilacion, hair removal, depilacion machine, elight+shr
A convenir
Medical Beauty
Shr technology:Shr=Super Hair Removal, it's a revolutionary technology of hair removal which is having a sweeping success.1. Shr machine is with Single pulse mode can emit energy averagely,...
Elight IPL+RF para depilación/eliminar las arrugas/rejuvenecimiento
A convenir
Medical Beauty
Shr technology:Shr=Super Hair Removal, it's a revolutionary technology of hair removal which is having a sweeping success.1. Shr machine is with Single pulse mode can emit energy averagely,...
Coffee capsule filling and sealing machine
A convenir
Ruian Xuanhai Machine Co.,Ltd.
Specifications1.automatic feed coffee capsules/cups 2.automatic fill coffee powder as precise weight 3g, 5g,7g, 3.automatic feed foil,seal equipment has functions as belowing : K cup feeding...
Pdrn Crecimiento Del Cabello Placentex Melsmon Placenta
$ 33 /ud
Hebei Kouxuan Technology Co., Ltd
PDRN injection Mesotherapy treatment for skin rejuvenation. The injection of PDRN makes it possible to rejuvenate the skin thanks to the biological molecules Polydeoxyribonucleotide (PDRN). A PDRN...