For the Hydraulic Check Valve with length diameter ratio of 25:1, AAK uses 3 poi
$ 30 /unidad
IVA no incluido
Cantidad mínima: 100 unidades
Tiempo de entrega: 3 meses
Envío a:
Todo el mundo
Descripción de
For the Hydraulic Check Valve with length diameter ratio of 25:1, AAK uses 3 poi
:
For the hydraulic check valve with the length diameter ratio of 25:1, Andrew contacted with more than 20 hydraulic check valve manufacturers online and offline in 1 week, but none of them was willing to offer. The boss was very dissatisfied and Andrew was very headache.
Andrew from Spain left a message on AAK Hydraulic Valve website some time ago: can you make samples for a hydraulic check valve with a length diameter ratio of 25:1? After communication, we learned about his current purchasing situation. Because he saw on B2B that AAK published an article on the length diameter ratio of a hydraulic relief valve, then he contacted us with a try attitude. According to Andrew's drawings, it is a long and thin shaft hydraulic check valve with very complex structure. No wonder no hydraulic valve manufacturer is willing to offer. I told him that this hydraulic check valve has a length to diameter ratio of 25:1, which was 5 times that of conventional valves, and it was difficult to cut. Especially in terms of accuracy, it was very particular about equipment, operators and technology. We are willing to make samples. If AAK sample fails, there is no need to find the hydraulic check valve manufacturer in Ningbo.
Andrew may have no choice but to accept the sample first and then quote. After 10 days, AAK sent 3 hydraulic check valve samples. The key to machining the thin and long shaft of this hydraulic check valve is how to control the thermal deformation of the workpiece. During cutting, the workpiece is high in temperature and easy to deform. On the 3rd day after Andrew received the samples, he informed by email that his team had approved that AAK hydraulic check valves not only had the length diameter ratio of 25:1 in place, but also had the surface roughness and geometric accuracy up to standard.
For hydraulic cartridge valves with large length diameter ratio, AAK has accumulated the following 3 experiences after years of exploration:
1. Drill and fixture: long drill to be matched from hardness, heat resistance and impact toughness. When the clamping method of one clamp and one top is adopted, the elastic movable center is also used to compensate the thermal deformation and elongation, so that the elongated shaft can be freely extended after being heated to avoid thermal deformation.
2. Cutting amount and cutting fluid: according to the length diameter ratio, the drilling amount is reasonably selected. This is a skill. During cutting, the cutting fluid shall be poured sufficiently to suppress the rise of the working temperature and thus the thermal deformation.
3. The tool shall be kept sharp and the tool changing frequency shall be increased to 3 times. It can effectively reduce the friction heat between the tool and the workpiece, and control the thermal deformation from the source.
Andrew from Spain left a message on AAK Hydraulic Valve website some time ago: can you make samples for a hydraulic check valve with a length diameter ratio of 25:1? After communication, we learned about his current purchasing situation. Because he saw on B2B that AAK published an article on the length diameter ratio of a hydraulic relief valve, then he contacted us with a try attitude. According to Andrew's drawings, it is a long and thin shaft hydraulic check valve with very complex structure. No wonder no hydraulic valve manufacturer is willing to offer. I told him that this hydraulic check valve has a length to diameter ratio of 25:1, which was 5 times that of conventional valves, and it was difficult to cut. Especially in terms of accuracy, it was very particular about equipment, operators and technology. We are willing to make samples. If AAK sample fails, there is no need to find the hydraulic check valve manufacturer in Ningbo.
Andrew may have no choice but to accept the sample first and then quote. After 10 days, AAK sent 3 hydraulic check valve samples. The key to machining the thin and long shaft of this hydraulic check valve is how to control the thermal deformation of the workpiece. During cutting, the workpiece is high in temperature and easy to deform. On the 3rd day after Andrew received the samples, he informed by email that his team had approved that AAK hydraulic check valves not only had the length diameter ratio of 25:1 in place, but also had the surface roughness and geometric accuracy up to standard.
For hydraulic cartridge valves with large length diameter ratio, AAK has accumulated the following 3 experiences after years of exploration:
1. Drill and fixture: long drill to be matched from hardness, heat resistance and impact toughness. When the clamping method of one clamp and one top is adopted, the elastic movable center is also used to compensate the thermal deformation and elongation, so that the elongated shaft can be freely extended after being heated to avoid thermal deformation.
2. Cutting amount and cutting fluid: according to the length diameter ratio, the drilling amount is reasonably selected. This is a skill. During cutting, the cutting fluid shall be poured sufficiently to suppress the rise of the working temperature and thus the thermal deformation.
3. The tool shall be kept sharp and the tool changing frequency shall be increased to 3 times. It can effectively reduce the friction heat between the tool and the workpiece, and control the thermal deformation from the source.
Hydraulic Check Valve
ID producto: 12965347
| Referencia: AAK324
| Vendido por:
AAK INDUSTRY CO., LTD
Fecha de alta del producto 17/09/2022
-
Modificado por el vendedor 17/09/2022
Productos relacionados con
For the Hydraulic Check Valve with length diameter ratio of 25:1, AAK uses 3 poi
14-26" Truck Tire Changer Car tyre changing machine
$ 2,200 /ud
Henan Lycoda Industrial Co.,Ltd
The best seller- 26" truck tire changer, also so car or suv tyres, if you want to change your wheel, it is your smart choice to choose our tyre changing machine. Model LY160Rim diameter:...
Elight+shr hair removal, depilacion, fotodepilacion, permanent hair removal
A convenir
Medical Beauty
The theory of Elight (ipl + rf)Advanced technologies: bipolar rf (radio frequency) + ipl(intense pulsed light), can be used together or separately. Perfect treatment results can be expected. The rf...
Fotodepilacion, hair removal, depilacion machine, elight+shr
A convenir
Medical Beauty
Shr technology:Shr=Super Hair Removal, it's a revolutionary technology of hair removal which is having a sweeping success.1. Shr machine is with Single pulse mode can emit energy averagely,...
Elight IPL+RF para depilación/eliminar las arrugas/rejuvenecimiento
A convenir
Medical Beauty
Shr technology:Shr=Super Hair Removal, it's a revolutionary technology of hair removal which is having a sweeping success.1. Shr machine is with Single pulse mode can emit energy averagely,...
Máquina de corte por láser láser de fibra de metal CNC de 3kw
A convenir
Jinan DXTECH CNC Machine Co., Ltd.
Machine Features 1: Suitable for all metal materials; 2: Suitable for metal sheet, pipe and tube; 3: Suitable for all metal process industrial, such as Automatic, Hardware, House ware,...
China diodo láser portátil 808nm/810nm depilación definitiva
A convenir
Medical Beauty
1.Teoría808NM System uses the unique laser with long pulse width 808nm to penetrate into hair follicle.Using the theory of selective optical absorption, laser can be preferentially absorbed by the...
Máquina de corte láser de fibra CNC Metal acero inoxidable 3000W 4000W
A convenir
Jinan DXTECH CNC Machine Co., Ltd.
Fiber Laser Cutting Machine 1000W/2000W/3000W fiber laser cutter is suitable for metal cutting such as Stainless Steel Sheet, Mild Steel Plate, Carbon Steel, Alloy Steel Plate, Spring steel Sheet,...
la máquina de embalaje el film de jabón de hotel
A convenir
Ruian Xuanhai Machine Co.,Ltd.
1. Using Air cylinder operation with PLC control.2. Auto pickup and press to twist the flex film, then reclaim rest of film.3. Auto hot press cutting.4. Can pack different shape of soaps without...
Aluminum Extrusion Profiles, Standard or Custom
A convenir
Cantidad mínima: 3.0 ud
GARCO
GARCO is a leading specialist in manufacturing high-tech custom aluminium extrusions across many industries, from windows to medical equipment worldwide. A dedicated production unit, which is used...
Custom Extruded Products - Grupo GARCO
A convenir
Cantidad mínima: 3.0 ud
GARCO
GARCO is a leading specialist in manufacturing high-tech custom aluminium extrusions across many industries, from windows to medical equipment worldwide. A dedicated production unit, which is used...
Máquina de corte láser CO2 tablero de espuma 300W no metal
A convenir
Jinan DXTECH CNC Machine Co., Ltd.
Partes principales 1. Taiwán alta velocidad y alta precisiónGuía linealCarril 2 de alta precisiónCremallera helicoidalSistema de 3LEADSHINEMotor 4. Tubo de láser CO2 sellado 5RuidaSistema de...
Máquina de corte láser de fibra de carbono para acero
A convenir
Jinan DXTECH CNC Machine Co., Ltd.
Área de procesamiento 1500mm * 3000mm Potencia de fibra 1000W/1500W/2000W/3000W/ 6000W/8000W Modo de refrigeración Sistema de refrigeración y protección por agua Restablecer la precisión de...
Juvederm 2 * 1 ML ultra 3 ultra 4 inyección de ácido hialurónico en gel relleno
$ 55 /pqte
Hebei Kouxuan Technology Co., Ltd
Hyaluronic acid (HA) is a naturally occurring substance that keeps skin moisturized and soft. JUVÉDERM® fillers are nonsurgical options that contain a modified form of HA. Treatment with JUVÉDERM®...
Máquina de corte por láser de placa de tubo múltiple automática DXTECH de China
A convenir
Jinan DXTECH CNC Machine Co., Ltd.
Main Feature 1. Highly efficient production and labor force cost saving. 2. Guarantee reliability of the process. 3. Processing quality consistency. 4. Higher rate of returned customers. 5....
IPL Elight machine for hair removal, depilacion, fotodepilacion, acne removal
A convenir
Medical Beauty
Applications of Elight (ipl+rf):- shr big crystal spot size 15x50 for hair removal with super stronger energy;- ipl+rf for skin rejuvenation ,shrink pores ,wrinkle removal. photo rejuvenation with...