On-line Billet End Continuous Temperature Measurement
Descripción de
On-line Billet End Continuous Temperature Measurement
:
Overview
The system aims at the continuous temperature detection of the product obtained from the continuous casting machine. The billets and their surrounding environmental factors such as scale, steam, shielding and other factors, are considered in the scheme design and equipment selection. The accurate detection and real-time transmission of temperature during the billets movement are also considered.
The equipment selection
Temperature detection
The billet temperature detection adopts the two-color integrated high-temperature thermometer produced by Wuhan CenterRise M&C Engineering CO.,;Temperature measurement range: 600°C - 1400°C; All components are installed in a sturdy housing for continuous measurement. The optimized treatment is taken for the problems that the semi-finished billets are hindered by steam or other particles (scale) in the environment, and the billets movement and the installation limited field of view. It provides fast, real-time monitoring of high temperature billets.
Equipment cooling
Using vortex air cooling device, no power supply is needed, only dry air is required, and the low temperature cooling gas below 0°C is output to cool the three sets of temperature detection equipment.
Signal transmission
The bidirectional RS-485 communication of the measurement and control system is used among multiple (multi-stream) measuring equipment or among the measuring equipment and the secondary meter. The Industrial Ethernet or DP network communication is used between the secondary instrument and the PLC. The signal transmission equipment adopts the communication equipment supporting multi-protocol network.
Purge device (optional)
When the environmental occlusion is severe, and the main occlusion is gaseous substances such as steam, it is recommended to use a purging device. The purging device uses dry air, and the solenoid valve controls the start and stop.
Software
Adopting DataTemp software to remotely set and monitor the measuring equipment. Adopting ScanTemp software to analyze and process the temperature data and eliminate invalid signals. Through the software model, the interference factors such as steam and iron scale can be overcome and the actual temperature of the casting billets can be displayed in real time.
The features
Using Si/Si stack detector, high sensitivity
It is easy to use and has sturdy housing, which meets NEMA-4 standard
Bidirectional RS-485/DP communication (can be networked), supports up to 32 detection sensors at most
With user-defined alarm methods, analog and digital outputs are synchronized
Use protective devices and air cooling devices, can withstand high temperature environment
The parameters
Measurement range:600℃~1400℃
Response time:10msc)
Spectral response:bicolor
Accuracy:±0.75%
Repeatability:±0.3%
Cooling air pressure:>0.5Kpa
Cooling air flow:24L/min
Max.temperature:165℃
Output signal:485 / DP / 4-20mA
Environment standard:NEMA4(IEC529,IP65)
The system aims at the continuous temperature detection of the product obtained from the continuous casting machine. The billets and their surrounding environmental factors such as scale, steam, shielding and other factors, are considered in the scheme design and equipment selection. The accurate detection and real-time transmission of temperature during the billets movement are also considered.
The equipment selection
Temperature detection
The billet temperature detection adopts the two-color integrated high-temperature thermometer produced by Wuhan CenterRise M&C Engineering CO.,;Temperature measurement range: 600°C - 1400°C; All components are installed in a sturdy housing for continuous measurement. The optimized treatment is taken for the problems that the semi-finished billets are hindered by steam or other particles (scale) in the environment, and the billets movement and the installation limited field of view. It provides fast, real-time monitoring of high temperature billets.
Equipment cooling
Using vortex air cooling device, no power supply is needed, only dry air is required, and the low temperature cooling gas below 0°C is output to cool the three sets of temperature detection equipment.
Signal transmission
The bidirectional RS-485 communication of the measurement and control system is used among multiple (multi-stream) measuring equipment or among the measuring equipment and the secondary meter. The Industrial Ethernet or DP network communication is used between the secondary instrument and the PLC. The signal transmission equipment adopts the communication equipment supporting multi-protocol network.
Purge device (optional)
When the environmental occlusion is severe, and the main occlusion is gaseous substances such as steam, it is recommended to use a purging device. The purging device uses dry air, and the solenoid valve controls the start and stop.
Software
Adopting DataTemp software to remotely set and monitor the measuring equipment. Adopting ScanTemp software to analyze and process the temperature data and eliminate invalid signals. Through the software model, the interference factors such as steam and iron scale can be overcome and the actual temperature of the casting billets can be displayed in real time.
The features
Using Si/Si stack detector, high sensitivity
It is easy to use and has sturdy housing, which meets NEMA-4 standard
Bidirectional RS-485/DP communication (can be networked), supports up to 32 detection sensors at most
With user-defined alarm methods, analog and digital outputs are synchronized
Use protective devices and air cooling devices, can withstand high temperature environment
The parameters
Measurement range:600℃~1400℃
Response time:10msc)
Spectral response:bicolor
Accuracy:±0.75%
Repeatability:±0.3%
Cooling air pressure:>0.5Kpa
Cooling air flow:24L/min
Max.temperature:165℃
Output signal:485 / DP / 4-20mA
Environment standard:NEMA4(IEC529,IP65)
billet temperature
continuous casting
slab temperature
steelmaking
ID producto: 14024651
| Vendido por:
Wuhan CenterRise M&C Engineering CO., Ltd.
Fecha de alta del producto 20/02/2023
-
Modificado por el vendedor 20/02/2023
Productos relacionados con
On-line Billet End Continuous Temperature Measurement
Mini máquina portátil de marcado láser de fibra de carbono metal acero inoxida
A convenir
Jinan DXTECH CNC Machine Co., Ltd.
1). Long lifetime, over 100,000 hours. 2). Compact laser source with air cooling. 3). 2 to 5 times more productive a traditional laser marker or laser engraver. 4). Super quality galvanometer...
Diode Laser, Laser de Diode para la depilacion, fotodepilacion, laser depilacion
A convenir
Medical Beauty
Advantages1. Suitable for any color of hair2. Suitable for any kind of skin3. Diode laser hair removal is safe, fast and high efficiency4. International Hair Removal Golden Standard.5. Permanent...
Ultrasonic filtro máquina de coser tc-60 modelo sintético
$ 1 /ud
ChangZhou TengChao Machinery Co., Ltd.
Technical Specification Item Ultrasonic Lace Sewing Machine Model tc-60 Power Source 220v /110v Inout Power 2000w (3 power adjustable) Output Frequency 20khz Working Speed 0-20m/minute Roller Size...
Máquina de coser por ultrasonidos con la mejor calidad
$ 1,500 /ud
ChangZhou TengChao Machinery Co., Ltd.
Technical Specification Item Ultrasonic Lace Sewing Machine Model tc-60 Power Source 220v /110v Inout Power 2000w (3 power adjustable) Output Frequency 20khz Working Speed 0-20m/minute Roller Size...
Máquina de coser por ultrasonidos para hacer bolsos no tejidos
$ 1,600 /ud
ChangZhou TengChao Machinery Co., Ltd.
Technical Specification Item Ultrasonic Lace Sewing Machine Model tc-60 Power Source 220v /110v Inout Power 2000w (3 power adjustable) Output Frequency 20khz Working Speed 0-20m/minute Roller Size...
Ultrasonic cinta Máquina de Navidad
$ 2,000 /ud
ChangZhou TengChao Machinery Co., Ltd.
Technical SpecificationItem Ultrasonic Lace Sewing MachineModel tc-60Power Source 220v /110vInout Power 2000w (3 power adjustable)Output Frequency 20khzWorking Speed 0-20m/minuteRoller Size...
Fotodepilacion, hair removal, depilacion machine, elight+shr
A convenir
Medical Beauty
Shr technology:Shr=Super Hair Removal, it's a revolutionary technology of hair removal which is having a sweeping success.1. Shr machine is with Single pulse mode can emit energy averagely,...
Elight IPL+RF para depilación/eliminar las arrugas/rejuvenecimiento
A convenir
Medical Beauty
Shr technology:Shr=Super Hair Removal, it's a revolutionary technology of hair removal which is having a sweeping success.1. Shr machine is with Single pulse mode can emit energy averagely,...
Ultrasonic lace sewing machine from china tc brand
$ 1,500 /ud
ChangZhou TengChao Machinery Co., Ltd.
Parameter Item Ultrasonic Lace Sewing Machine(ce qualified) Model Tc-60 Power Source 220v /110v Inout Power 2000w (3 power adjustable) Output Frequency 20khz Working Speed 0-20m/minute Roller Size...
máquina de coser por ultrasonidos tc-100
$ 1,200 /ud
ChangZhou TengChao Machinery Co., Ltd.
Parameter Item Ultrasonic Lace Sewing Machine(ce qualified) Model Tc-60 Power Source 220v /110v Inout Power 2000w (3 power adjustable) Output Frequency 20khz Working Speed 0-20m/minute Roller Size...
Coffee capsule filling and sealing machine
A convenir
Ruian Xuanhai Machine Co.,Ltd.
Specifications1.automatic feed coffee capsules/cups 2.automatic fill coffee powder as precise weight 3g, 5g,7g, 3.automatic feed foil,seal equipment has functions as belowing : K cup feeding...
Máquina de corte por láser láser de fibra de metal CNC de 3kw
A convenir
Jinan DXTECH CNC Machine Co., Ltd.
Machine Features 1: Suitable for all metal materials; 2: Suitable for metal sheet, pipe and tube; 3: Suitable for all metal process industrial, such as Automatic, Hardware, House ware,...
Elight+shr hair removal, depilacion, fotodepilacion, permanent hair removal
A convenir
Medical Beauty
The theory of Elight (ipl + rf)Advanced technologies: bipolar rf (radio frequency) + ipl(intense pulsed light), can be used together or separately. Perfect treatment results can be expected. The rf...
de ropa desechable hot air sealer
$ 3,000 /ud
ChangZhou TengChao Machinery Co., Ltd.
==Features== 1-Controlled by Panasonic programmable plc with high definition display, English touch interface, process can be modified according to users' requirements. 2-Auto controllable...
Máquina de corte láser de fibra CNC Metal acero inoxidable 3000W 4000W
A convenir
Jinan DXTECH CNC Machine Co., Ltd.
Fiber Laser Cutting Machine 1000W/2000W/3000W fiber laser cutter is suitable for metal cutting such as Stainless Steel Sheet, Mild Steel Plate, Carbon Steel, Alloy Steel Plate, Spring steel Sheet,...
Búsquedas relacionadas con